Aflat wire fitted with aluminum and copper conductor and PVC insulation, with adhesive base

APPLICATION:

The wire is designed for electric plants and fixed installation in power lighting systems, as well as for fixed installation of electrical equipment of apparatuses, mechanisms and machines at rated voltage of up to 450 V (for 450/750 V networks) and frequency of up to 400 Hz or DC voltage of up to 1000 V. The wire is not intended for flexible installation.

CONSTRUCTION:

Conductor - Conductor made of two or three parallel flexible aluminum wires (for APPV) and flexible copper wires (for PPV)

Insulation - Insulating PVC compound. Color - white, gray, yellow, orange, red, pink, blue, green, brown, black, purple and yellow-green (for solid conductors of up to 6 mm2 in section).

OPERATION AND INSTALLATION CONDITIONS:

Installation in hollow ducts of building structures, mounting boxes, trays, pipes, as well as in bundles inside switchboards, control cabinets and control panels of equipment Installation temperature - not below -15°C Installation bends - at least 10 diameters

Operation conditions - ambient temperature of up to -50°C, relative humidity of up to 100% at the temperature of up to +35°C

Allowable continuous temperature of conductors heating - 70°C max Service life under normal operating conditions - at least 15 years

ELECTRICAL CHARACTERISTICS:

Electric resistivity of conductor at temperature of 20°C, Ohm*mm2/m - 0.02800 max;

Insulation resistance at 20°C, kOhm/km:

At least 1000 - for acceptance and delivery At least 10 - for storage and operation period

PRIMARY MANUFACTURED ASSORTMENT

Type of APPV, PPV

Number of conductors in wire

Diameter of conductor, mm

2,3

0,75; 1,0; 1,5; 2,5; 4,0; 6,0

DELIVERY FORM:

Wire is delivered in coils, in lengths not shorter than construction ones.