Brand (A)VBShv, (A)PvBShv, (A)VBShp, (A)PvBShp, (A)VBShvng(A)-LS, (A)PvBShvng(A)-LS

Power cables for voltage 0.66-1.3 kV. Brand (A)VBShv, (A)PvBShv, (A)VBShp, (A)PvBShp, (A)VBShvng(A)-LS, (A)PvBShvng(A)-LS

Standards

GOST 31996-2012, IEC 60502-1

Main design elements

1. Round or sector-shaped multi-wire compacted or single-wire conductive core:

- Material: Aluminum (AI), Copper (Cu)

Cross-section, mm2 (AL)
-single core round conductor “ok” - (2.5-16)mm2
-multi-core round conductor “mk” - (25-1000)mm2
-multi-core sector shaped conductor “ms” - (25-400)mm2

Cross-section, mm2 (CU)
-single core round conductor “ok” - (1.5-16)mm2
-multi-core round conductor “mk” - (16-1000)mm2
-multi-core sector shaped conductor “ms” - (25-400)mm2

2. Insulation:

- Polyvinylchloride PVC (B)
-*Flame retardant (Low smoke)  (B)
- cross-linked polyethylene (PVC)

3. Inner covering (Filler)

- Flame retardant PVC

4. Armor:

- for cables ((A)VBbShv, (A)VBShv, (A)VEBShv, (A)PvBbShv, (A)PvBShv, (A)PvEBShv) - made of two galvanized steel tapes;
- for cables ((A)VKShv, (A)PvKShv) - made of galvanized steel wires;
- for cables ((A)VKaShv, (A)PvKaShv) - made of aluminum wires or aluminum alloy wires.

5. Sheath

- PVC plastic (Shv)
- Polyethylene (Shp)
- Low-flammability PVC plastic (Shv)

Application area of ​​the cable

Cables are used for laying cable lines in cable structures and rooms of internal (closed) electrical installations, for electrical wiring in residential and public buildings.
Cables can be laid without limiting the level difference along the laying route, including on vertical sections. 
The cables do not spread combustion when laid in groups.

-Cables with a protective cover made of two steel tapes, with a protective hose made of PVC plastic. Cables are operated if there is a risk of mechanical damage during operation.

-Cables are allowed to be laid in the ground (trenches). 

-Cables with armor made of round galvanized, or aluminum, or aluminum alloy wires, behind- a protective outer sheath made of PVC plastic.